Enviromose Pro Grade Paint Stripper 1 litre

Enviromose Pro Grade Paint Stripper 1 litre

Enviromose paint stripper has double the strength with its extra strong gel formula. Ideal for using on metal, wood, masonry, artex etc. It strips all surfaces safely & quickly!

Features:

• Water Based
• Low Odour
• Safer
• Easy to apply gel
• Fast acting

Useful Information

• Wear suitable gloves & eye protection
• Enviromose must be shaken well before use
• For best results use between 10C - 30C
• Do not try to spread the product too ar as this will result in poor penetration
• Allow Envirose to do its work: do not try to remove too quickly 
• Never let the surface become too dry during treatment

Preparation: Ensure surfaces to be stripped are dry. Protection should be provided for floor coatings, or any surface that may be damaged by Envirmose (perspex, plastics, rubber etc.

How to apply

1. Cover top with a cloth during opening to avoid splashes.
2. Apply generous, even coat & do not brush out. Layer Enviromose onto surface to be stripped with suitable brush..
3. Leave for 1 hour & apply a second generous coat. For less than 5 layers of paint or varnish, a second coat may not be necessary.
4. After product has penetrated to be substrate (up to 24 hours), scrape off, leaving surface as clean as possible.
5. Rub down using a scrubbing brush or stainless stell pad & water.
6. Rinse with clean cold water & allow to dry.